As an Amazon Associate I earn from qualifying purchases.
27.5" 29", Mudhugger MTB Rear Mudguard For Suspension Mountain BikeMudhugger
- Approx 207g. Includes frame tape and zipties. Also fits 650B Plus size wheels. These are the best looking mudguards we have seen and they really work :-. Suitable for 29.
Mudhugger Front Guard & Standard Rear Mudguard SetMudhugger
- Front and Rear Mudguard set. Lightweight. Suitable for 26" full suspension and 26" and 27. 5" hardtail bikes. Simple to fit with cable tie mounting. Easy to use protection from mud and spray.
|Weight||0.33 kg (0.74 Pounds)|
Mudhugger Standard Rear MudguardMudhugger
- Suitable for 26" full suspension and 26" and 27. 5" hardtail bikes. The ideal guard to get you out in all-weather without having mud or spray flying up off your rear tyre.
Cannot be fitted to bikes with cantilever style rim brakes. Cable tie mounting - Includes frame tape and zipties. Lightweight at only 208g.
|Weight||0.22 kg (0.5 Pounds)|
Black, Small/Trail MTB Mud Fender Guard Dirt Shield Splash Protection Downhill Water Rain Wet Race Tail 26" 27.5" Inch 650b Hardtail Full Suspension Back Board, Mudhugger Rear Mountain Bike MudguardMudhugger
- Small 56cm long: ideal for 26" hardtail/Full Suspension bikes & most 27. 5" hardtail bikes. Medium 64cm long: ideal for most 29" and 27. 5+ full suspension bikes with seat stay angles above 27 degrees. Some frames have assymetrical stays, and may not fit or will require extensive customisation to fit.
Kit includes fender, zipties, protective/non-slip tape and instructions. Large 76cm long: ideal for all 29" and 27. 5+ full Suspension bikes. The rear fender braces are designed to be custom-cut around cable stops/guides and other unique seatstay/swingarm shapes and features.
One Size, Black, Mudhugger Unisex's MMU06 & MMU07 Gravelhugger Set Front and Rear Mudguard for Gravel BikeMudhugger
- Included components: 1 x front and 1 rear gravelhugger. Front: suitable for 700c max tyre width 42mm and 650b wheels Max tyre width 50mm depending on wheel/tyre/fork combination.
Rear gravelhugger will fit most bike frame seat stays with angles approx 40-55 degrees. Front: following the tried and tested tyre hugging design of our MTB Mudhuggers the GravelHugger is designed to fit most fork + wheel + tyre up to 50mm wide combo's for your Gravel Bikes.
Designed, made and packed in the UK from 99% recycled polypropylene, which of course can be recycled again. Set of front and rear Gravelhugger mudguards. Front mudguard will fit most fork, wheel and tyre up to 50mm wide combo's for Gravel Bikes. The rear gravelhugger will fit most bike frame seat stays with angles approx 40-55 degrees and designed for tyres up to 50mm wide.
Mudhugger 29er Rear MudguardMudhugger
- Cannot be fitted to bikes with cantilever style rim brakes. Suitable for 650b and 29" hardtail and full suspension bikes. Cable tie mounting - Includes frame tape and zipties.
Lightweight at only 208g. The ideal guard to get you out in all-weather without having mud or spray flying up off your rear tyre.
|Weight||0.23 kg (0.51 Pounds)|
7. Mud Hugger
One Size, Mud Hugger Cycling 29er Rear Mudhugger, BlackMud Hugger
- Initially designed to overcome the problem of fitting mudguards to a bike with a dropper seat post the Rear Mud hugger works well on all bikes, providing they have disc brakes.
29er fits 650b and 29er hardtail and full suss bikes. Weight approx. 640mm long, 95mm wide. From the likes of tomorrow’s champs in the rippers category to 2015 World Champion loic bruni, along with team Mate Finn iles, 2016 Junior world CHAMP, who choose to use the FR when the conditions require maximum mud protection.
With various holes for fitting to different fork braces, the FR Hugger is suitable for all wheel sizes, 26er 650B and 29er wheel. It also works on plus wheels with tyres up to 3 inches wide in a ‘boost’ fork. 208g fittings.
|Height||9 cm (3.54 Inches)|
|Length||22 cm (8.66 Inches)|
|Weight||0.21 kg (0.46 Pounds)|
|Width||61.8 cm (24.33 Inches)|
Black, 700c / Road Gravel Cycle 650b Fender Guard Mud Board Muck Splash Rain Water Winter Wheel Protection Race Protective Trail Tail Back Shield, Mudhugger Gravelhugger Rear Bike MudguardMudhugger
- Designed, made and packed in the UK from 99% recycled polypropylene, of course, which can, be recycled again. Helitape is supplied to protect the seat stays where the GravelHugger sits on the seat stays, invisframe, ensure you use this tape, electrical tape or similar are not sufficiently thick to protect your bikes paint and frame.
Width 55mm. Designed to be attached to the bike with zipties as these afford the most secure way to fitting.
The rear gravelhugger will fit most bike frame seat stays with angles approx 40-55 degrees and designed for tyres up to 50mm wide. Suitable for 700c and 650b wheels max tyre width 50mm depending on wheel/tyre combination. Weight approx 150g. Length 560mm. The rear gravelhugger can also be attached utilising hook and loop straps sold separately making removing and refitting quicker and reduce single use plastic waste.